• Address: Sintra Business Park,
    Ed. 1, 2º L-B, 2710-089 Sintra, Portugal

  • Contact Us: (+351) 219 184 261
    info@epbs-solutions.com

ESD Dry storage cabinets

DC ESD series dry storage cabinets is a line of special equipment designed to provide ultra-low ranges of relative humidity, which is necessary for handling moisture-sensitive components and materials including precision metal parts, printed circuit boards, plates, nano fibers, cassettes, laboratory samples, electronic modules.

ESD Dry storage cabinets
DC ESD series dry cabinets

DC ESD series dry storage cabinet is a line of special equipment designed to provide ultra-low ranges of relative humidity, which is necessary for handling moisture-sensitive components and materials including precision metal parts, printed circuit boards, plates, nano fibers, cassettes, laboratory samples, electronic modules.

All DC ESD series cabinets produced only in antistatic (ESD) version, in strict compliance with ESD safety regulations of IEC 61340-5-1.

For dry storage cabinets we use only specific ESD glass with conductive surface (conductivity 103 -105 Ohm). All the shelves and horizontal surfaces of the cabinet are grounded and ESD coating of all metal elements is applied. DC-1 cabinets are supplied in a set with one middle shortened shelf.

DC-1 ESD dry storage cabinets are equipped with RS-232 ports that allows data collection. One should simply connect DC dry cabinet to a computer using standard cable.

VIKING dry cabinets can be operated remotely via VIKING Humidity manager software – a user-friendly software that helps the operator to be aware of the storage conditions; records dry cabinet data and allows checking the graphs over a period of time.

DC series cabinets feature humidity & temperature display with parameter value input on easy-to-operate three buttons digital control LSD panel.

Humidity and temperature monitoring is performed by the built-in precision sensor with digital interface, processor and LCD display. Monitoring is performed by a sensor, based on CMOS technology, each sensor is being factory calibrated prior to installation.

DC-1 ESD series small desktop dry cabinets

ParameterValue
Dimensions, W×H×D, mm600×737×640 (calculated without light column)
Volume, liters238
Number of sections1
Number of shelves*1 lower shelf – bottom of the section
1 shortened shelf  in a set
1 additional shortened shelf on request
Load capacity, kgup to 55
Max. dimensions of units to storeWidth up to 500 mm
Heights up to 510 mm
Depth up to 570 mm**
Humidity range1 – 50%
Precision±1%
Absorption of moistureautomatically regenerated absorbent (Zeolite)
Desiccation time (50% to 1 % RH)less or equal to 1 h 40 min
Recovery to <5% RH***less or equal to 8 min
Door alarmintegrated
Max. power consumption210-240 watt-hour in regeneration phase, 20-30 watt-hour in storage phase
Supply voltage220±22
IP protection classIP 55
Weight, kg60

* Recommended number. More shelves available on request
**Separate numbers for each dimension
*** After 10 sec door opening

DC-2 ESD dry storage cabinet

ParameterValue
Dimensions, W×H×D, mm600×1342×640 (calculated without light column)
Volume, liters454
Number of sections2
Number of shelves*2 bottoms of each section, used as shelves
2 middle shelves in a set – 1 standard and 1 shortened
2 more shortened shelves on request
Load capacity, kgup to 55
Max. dimensions of units to storeWidth up to 500 mm
Heights up to 510 mm
Depth up to 570 mm**
Humidity range1 – 50%
Precision±1%
Absorption of moistureautomatically regenerated absorbent (Zeolite)
Desiccation time (50% to 1 % RH)less or equal to 1 h 40 min
Recovery to <5% RH***less or equal to 8 min
Door alarmintegrated
Max. power consumption210-240 watt-hour in regeneration phase, 20-30 watt-hour in storage phase
Supply voltage230±10%
IP protection classIP 55
Weight, kg100

* Recommended number. More shelves available on request 
**Separate numbers for each dimension
*** After 10 sec door opening

DC-3 ESD dry storage cabinet

ParameterValue
Dimensions, W×H×D, mm600×1947×640 (calculated without light column)
Volume, liters670
Number of sections3
Number of shelves*3 bottoms of each section, used as shelves
3 middle shelves in a set – 2 standard and 1 shortened
1 more standard and 2 more shortened shelves on request
Load capacity, kgup to 55
Max. dimensions of units to storeWidth up to 500 mm
Heights up to 510 mm
Depth up to 570 mm**
Humidity range1 – 50%
Precision±1%
Absorption of moistureautomatically regenerated absorbent (Zeolite)
Desiccation time (50% to 1 % RH)less or equal to 1 h 40 min
Recovery to <5% RH***less or equal to 8 min
Door alarmintegrated
Max. power consumption210-240 watt-hour in regeneration phase, 20-30 watt-hour in storage phase
Supply voltage230±10%
IP protection classIP 55
Weight, kg131

* Recommended number. More shelves available on request 
**Separate numbers for each dimension
*** After 10 sec door opening

DC-4 ESD dry storage cabinet

ParameterValue
Dimensions, W×H×D, mm1205×1342×640 (calculated without light column)
Volume, liters900
Number of sections4
Number of shelves*4 bottoms of each section, used as shelves
4 middle shelves in a set – 2 standard and 2 shortened
4 more shortened shelves on request
Load capacity, kgup to 55
Max. dimensions of units to storeWidth up to 500 mm
Heights up to 510 mm
Depth up to 570 mm**
Humidity range1 – 50%
Precision±1%
Absorption of moistureautomatically regenerated absorbent (Zeolite)
Desiccation time (50% to 1 % RH)less or equal to 1 h 40 min
Recovery to <5% RH***less or equal to 8 min
Door alarmintegrated
Max. power consumption210-240 watt-hour in regeneration phase, 20-30 watt-hour in storage phase
Supply voltage230±10%
IP protection classIP 55
Weight, kg170

* Recommended number. More shelves available on request 
**Separate numbers for each dimension
*** After 10 sec door opening

DC-6 ESD dry storage cabinet

ParameterValue
Dimensions, W×H×D, mm1205×1947×640 (calculated without light column)
Volume, liters238
Number of sections1
Number of shelves*6 bottoms of each section, used as shelves
6 middle shelves in a set – 4 standard and 2 shortened**
4 more shortened shelves and 2 more standard shelves on request
Load capacity, kgup to 55
Max. dimensions of units to storeWidth up to 500 mm
Heights up to 510 mm
Depth up to 570 mm***
Humidity range1 – 50%
Precision±1%
Absorption of moistureautomatically regenerated absorbent (Zeolite)
Desiccation time (50% to 1 % RH)less or equal to 1 h 20 min
Recovery to <5% RH****less or equal to 3 min
Door alarmintegrated
Max. power consumption210-240 watt-hour in regeneration phase, 20-30 watt-hour in storage phase
Supply voltage230±10%
IP protection classIP 55
Weight, kg227

* Recommended number. More shelves available on request
**Can be installed in checkerboard order
***Separate numbers for each dimension
**** After 10 sec door opening

LED-DC Inner LED indicative lighting
LED-DC Inner LED indicative lighting

Inner LED indicative lighting helps to quickly check the cabinet’s current status:

  • Green – indicates the cabinet proper functioning and targeted relative humidity/O2 level,
  • Yellow – cabinet is in recovery mode (for example, after opening the door),
  • Purple– the cabinet is working in nitrogen supply before reaching О2 level,
  • Flashing red – when the door is being opened for more than 30 sec,
  • Red – reports critical errors in cabinet operation,
  • Cold white – when opening the door or when changing the cabinet settings.
Automatic nitrogen unit

Automatic nitrogen unit is a built-in module installed to an upper part of any DC dry cabinet.

This unit provides the possibility to automatically control nitrogen supply.

  • Nitrogen source: external – cylinder or delivery pipe, should be plugged in via connector located on the backside of the cabinet
  • Diameter of the connecting pipe 8 mm
DC-AW Manual nitrogen unit
DC-AW Manual nitrogen unit

Manual nitrogen unit can be installed to any VIKING DC series dry cabinet as additional module.

This unit provides the possibility to manually control nitrogen supply.

  • Nitrogen source: external – cylinder or delivery pipe, should be plugged in via connector located on the backside of the cabinet
  • Diameter of the connecting pipe 8 mm
  • Equipped with a small section for documents storage
SMD Reels adjustable rack

SMD Reels adjustable Rack is mounted on a standard dry storage cabinet shelf. Allows organizing three rows for 82-215 mm diameter SMD reels. Minimum width of each cell is 27 mm.

Shelves separators
Shelves separators

Mounted on a standard dry storage cabinet shelf. Limits the inner space of the shelf for components storage. Can be installed in both positions – along and across the shelf.

Sliding shelves for dry storage cabinets
Sliding shelves for dry storage cabinets

Sliding shelf is a kit containing two sections with sliding mechanism, upper section is equipped with upturns for components and assemblies storage, lower section is a narrow case for documents storage.

Sliding shelves kit can be installed to any Viking Dry Storage cabinet.