-
Address: Sintra Business Park,
Ed. 1, 2º L-B, 2710-089 Sintra, Portugal -
Call Us: (+351) 219 184 261 (National Fixed Network Call, Portugal)
info@epbs-solutions.com
Soldering Stations
TMT-9000S Soldering Station
The TMT-9000S Soldering Station is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
- High thermal recovery & performance.
- 13.56MHz power supply with built-in LCD display.
- Dual switchable soldering ports.
- No calibration or operator training required.
- No additional coil assembly costs.
TMT-9000S Specifications
| Input Line Voltage: | TMT-9000PS-1 | 100-110 VAC |
| TMT-9000PS-2 | 220-240 VAC | |
| Tip to Ground Potential: | 2mV, true RMS 50-500Hz | |
| Tip to Ground Resistance: | <2 Ohms DC | |
| Idle Temperature Stability: | +/- 1.1°C (2°F) | |
| Ambient Operating Temperature: | 10-40°C (50°F -104°F) | |
| Maximum Enclosure Temperature: | 50°C (122°F) | |
| Fuse: | TMT-9000PS-1 | 125V 1A |
| TMT-9000PS-2 | 250V 0.5A | |
| Output Power (Maximum): | 40 Watts | |
| Output Frequency: | 13.56 MHz | |
| Size (W x H x D): | 212.4mm x 118mm x 132mm | |
| Weight: | 3.47 KG | |
| LCD display: | 60.0mm x 16.0mm | |
| Input Line Frequency: | 50/60 Hz | |
Packing List
| TMT-9000PS | Power Supply |
| SHH-1 | Soldering Handpiece Holder |
| SHP-1 | Soldering Handpiece |
| RMP-1 | Tip Removal Pad |
| SG-1-GR | Handpiece Grip Green |
| SG-1-GY | Handpiece Grip Gray |
| BC-1 | Brass Curls |
| SPG-1 | Sulphide Free Sponge |
| M7CH176 | Soldering Tip Cartridge |
TMT-2000S Soldering Station
The TMT-2000S Soldering Station is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
- Curie Heat Technology operating at 470KHz.
- Maximum flexibility, allows the use of K, P and S Series tips.
- Extremely compact, weighs just 1.3KG.
- No calibration or operator training required.
- No additional coil assembly costs.
TMT-2000S Specifications
| Input Line Voltage: | 100-240 VAC, 55W |
| Tip to Ground Potential: | 2mV, true RMS 50-500Hz |
| Tip to Ground Resistance: | <2 Ohms DC |
| Idle Temperature Stability: | +/- 1.1°C (2°F) |
| Maximum Enclosure Temperature: | 50°C (122°F) |
| Fuse: | 250V 1A |
| Output Power (Maximum): | 50 Watts |
| Output Frequency: | 470 Khz |
| Size (W x H x D): | 110mm x 155mm x 92mm |
| Weight: | 1.3 KG |
| Input Line Frequency: | 50/60 Hz |
Packing List
| TMT-2000PS | Power Supply |
| SHH-4 | Soldering Handpiece Holder |
| SHP-K1 | Soldering Handpiece |
| RMP-1 | Tip Removal Pad |
| CC-1 | Connection Cable |
| BC-1 | Brass Curls |
| SPG-1 | Sulphide Free Sponge |
| 1The handpiece will vary based on system configuration. | |
K SERIES - TIP CARTRIDGES
For use with TMT-2000S-K, TMT-2000S-KM
P SERIES - TIP CARTRIDGES
For use with TMT-2000S-P, TMT-2000S-PM
S SERIES - TIP CARTRIDGES
For use with TMT-2000S-SM
Related products
Solder & Fluxes
Stencil Cleaners
Test Probes
Fume Extraction System